*******************************************************
Total3D 128V Windows NT 4.0 Display Drivers 
*******************************************************

This is a release of the Windows NT 4.0 display drivers 
for Total3D 128V.  These drivers will work with any
Canopus-manufactured, nVidia RIVA128-based graphics card.  

------------------------
Report Form Information:
------------------------

Name:
Phone:
Driver Version:
Resolution:
Color Depth:
Application:
Problem Description:
Method To Reproduce:

System Information:

-------------------------
INSTALLATION INSTRUCTIONS
------------------------- 

To install these drivers, you must be running Microsoft's Windows
NT 4.0 operating system.  You may also want to install the Windows 
NT 4.0 Service Packs 1 and 2, available from Microsoft's ftp site:
ftp.microsoft.com/bussys/winnt/winnt-public/fixes/usa/nt40

1.  Extract the driver files [Totl3V.dll, Totl3V.inf, Totl3VM.sys] 
    into an empty directory or onto a floppy disk.

2.  Go to the Display control panel, and click on the "Settings"
    tab.

3.  Click on "Display Type" to bring up the Display Type window.  
    Click on "Change,"  which will bring up the Change Display 
    window.  Click on "Have Disk," and specify the location where 
    you copied the driver files.  Click "OK."
    
4.  "Canopus Total3D 128V" will come up highlighted.  Click "OK." 

5.  You will be prompted with a notice that "You are about to install 
    a third-party driver..."  Click "Yes" to proceed with installation.  

6.  After installation, you will be instructed to exit out of the 
    control panel and restart your computer.  Click "OK," then "Close," 
    and "Close" again.  Then click "OK" to restart your computer.


----------------
COPYRIGHT NOTICE
----------------

This software and documentation are Copyright 1997 Canopus 
Corporation.  Redistribution of this software or use on hardware 
not manufactured by Canopus Corporation is strictly prohibited.